NETGEAR WGR613VAL Manual page 14

NETGEAR Wireless Router Setup Manual
Locate the Ethernet cable (cable 1 in the diagram) that connects your PC to the modem.
c.
Figure 3-1: Disconnect the Ethernet cable from the computer
Disconnect the cable at the computer end only, point A in the diagram above.
d.
Look at the label on the bottom of the wireless router. Locate the Internet port. Securely
e.
insert the Ethernet cable from your modem (cable 1 in the diagram below) into the Internet
port of the wireless router as shown in point B of the diagram below.
Figure 3-2: Connect the wireless router to the modem
Note: Place the wireless router in a location which conforms to the
Performance, Placement, and Range Guidelines" on page
wireless router provides a convenient, space-saving way of installing the wireless router.
Avoid stacking it on other electronic equipment.
3-2
A
B
September 2004
"Observe
4-1. The stand provided with the
Connecting the Router to the Internet