Technical Specifications - NETGEAR WGR615VV2 Manual

This appendix provides technical specifications for the Wireless Router.
Network Protocol and Standards Compatibility
Data and Routing Protocols:
Power Adapter
All regions (output):
Environmental Specifications
Operating temperature:
Operating humidity:
Electromagnetic Emissions
Meets requirements of:
Interface Specifications
LAN:
WAN:
Wireless
Radio Data Rates
Frequency
Data Encoding:
Maximum Computers Per Wireless
Network:
Operating Frequency Ranges:
802.11 Security:

Technical Specifications

Technical Specifications
TCP/IP, RIP-1, DHCP
PPP over Ethernet (PPPoE)
12V DC @ 1.5A output
0° to 40° C (32º to 104º F)
90% maximum relative humidity, noncondensing
FCC Part 15 Class B
The router incorporates Auto Uplink
the need for crossover cables.
10BASE-T or 100BASE-Tx, RJ-45, autosensing and capable of
full-duplex or half-duplex operation.
10BASE-T or 100BASE-Tx, RJ-45, autosensing and capable of
full-duplex or half-duplex operation.
1, 2, 5.5, 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
Auto Rate Sensing
2.4Ghz
802.11b/g 2.4GHz to 2.5GHz CCK and OFDM Modulation
Limited by the amount of wireless network traffic generated by each
node. Typically up to 30 nodes.
2.412~2.462 GHz (US)
40-bits (also called 64-bits) and 128-bits WEP and WPA
September 2004
Appendix A
technology which eliminates
TM
A-1