The Front Panel - NETGEAR WGR615VV2 Manual

NETGEAR Wireless Router Setup Manual

The Front Panel

The front of the wireless router includes these status lights you can use to verify connections.
Figure 2-1: wireless router Front Panel
Viewed from left to right, the table below describes the lights on the front panel of the router.
Table 2-1. Status Light Descriptions
Label Activity
Power On Green Solid
Off
Test Blinking
Off
Internet On
Port Blink
Wireless On
Internet On
Port Blink
Phone Off
Port On
LAN Ports Green
Amber
2-2
Description
Power is supplied to the router.
Power is not supplied to the router.
The router is performing its diagnostic test.
The router successfully completed its diagnostic test.
The Internet port has detected a link with an attached device.
Data is being transmitted or received by the Internet port.
The 802.11g wireless interface is enabled.
The Internet port has detected a link with an attached device.
Data is being transmitted or received by the Internet port.
The phone port has not yet been provisioned by the service provider.
The phone port has been provisioned by the service provider.
The LAN port has detected a 100 Mbps link with an attached device.
The LAN port has detected a 10 Mbps link with an attached device.
Getting to Know Your NETGEAR Wireless Router
September 2004