Setting Up Windows - Sharp PC-TN1 Series Operation Manual

Setting Up Windows

To set up Windows, follow the instructions on the screen. See also the Windows quick
start guide. It takes approximately 5-10 minutes to complete the entire setup process.
Use the keyboard and the glide pad for Windows setup. The tablet pen is
not available for the setup.
The steps in the setup process are as follows:
•
Configuring your location, language and keyboard type
•
Configuring your time zone
•
Accepting license agreement
•
Naming your computer
•
Setting the administrator's password
•
Setting your network environment
•
Creating an account
•
Completing configuration
• Do not turn off your computer until completing Windows setup. If you
turn it off, you cannot set up Windows later.
• Be sure to connect your computer to AC power source. An
undercharged battery may not be able to complete the Windows setup.
• Do not connect any peripheral devices to your computer until the
Windows setup completes. Otherwise your computer may malfunction.
• If the display turns off, some power management may function. In this
case, press any key to resume your computer from the power
management. (Refer to Power Management section of Chapter 4.)
• If you cannot operate the keyboard or the touch pad, slide and hold the
power switch for more than four seconds to turn off your computer. Be
sure that the power indicator turns off; then, after more than 10
seconds, slide the power switch to turn it on back.
1
1-5