Sharp AQUOS LC-70LE632U Operation Manual page 92

To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV.
Connecting an Antenna/Cable
Check the type of antenna cable you are using.
(for receiving cable-TV without a set-top box, including unscrambled cable HD channels, or
off-air HDTV broadcasts)
Home Antenna
1. A 75-ohm system is generally
terminal (75-ohm)
a round cable with F-type
Cable TV lead-In
connector that can easily be
attached to a terminal without
tools (commercially available).
75-ohm
coaxial cable (round)
2. A 300-ohm system is a fl at
"twin-lead" cable that can be
attached to a 75-ohm terminal
300-ohm
through a 300/75-ohm adapter
twin-lead cable
(commercially available).
3. A separate VHF/UHF antenna
300-ohm
has two antenna cables. Use
twin-lead cable
a combiner (commercially
300-ohm
available) to connect the antenna
twin-lead cable
cables to a 75-ohm terminal.
75-ohm coaxial cable
For information on the antenna type, see the operation manual of your TV.
Connecting a Cable/Satellite Set-top Box
You can use the VIDEO terminal with a component cable.
Cable
IN
OUT
LINE OUT
Connecting Multiple Devices to the TV
Connecting an HD Cable/Satellite Set-top Box, Blu-ray Disc/DVD Player and Amplifi er
Cables required:
1 Coaxial cable
2 HDMI-certifi ed cable
Cable
3 Optical fi ber cable
Splitter
You can connect the TV
using a splitter only when
the connection involves a
cable set-top box. When
you use the satellite
set-top box, connect a
dedicated cable directly to
the satellite set-top box.
HD Cable/
Satellite
set-top box
DIGITAL LINE OUT
IN
AUDIO HDMI
OUT
Blu-ray disc/
DVD player
DIGITAL
HDMI
AUDIO
Amplifier
DIGITAL TV
AUDIO
The above is a connection example. For information on connecting external equipment to the
TV, see the operation manual of the equipment.
The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products.
Coaxial cable
F-type connector
300/75-ohm adapter
Combiner
IN OUT
or
VIDEO (Yellow)
AUDIO-L (White)
AUDIO-R (Red)
Back panel
surface inputs
Back panel
horizontal inputs
Back panel
vertical inputs
or
Connecting an HD Cable/Satellite Set-top Box
■ When using HDMI cable (HDMI 1, 2, 3 or 4):
The HDMI (High Defi nition Multimedia Interface) terminal is
an audio-video interface that enables a connection for audio
and video signals using a single cable. The HDMI terminal
supports high-resolution video input.
Cable
IN
HDMI
OUT
LINE OUT
When you connect external equipment using a DVI-HDMI conversion
cable or when you connect ARC-compatible equipment, use HDMI 1.
■ When using DVI-HDMI conversion cable (HDMI 1):
When using a DVI-HDMI conversion cable, you should
make an analog audio connection. In this case, in
addition to connecting a DVI-HDMI conversion cable to
the HDMI 1 terminal, connect a ø 3.5 mm stereo minijack
cable to the AUDIO IN terminal and set "Audio Select" to
"HDMI+Analog".
Cable
LINE OUT
IN
OUT
AUDIO DVI
■ When using Component cable (COMPONENT):
AUDIO-L (White)
Cable
AUDIO-R (Red)
IN
COMPONENT OUT
OUT
Connecting a Cable/Satellite Set-top Box and VCR
You can connect the TV using
Cables required:
a splitter only when the
1 Coaxial cable
connection involves a cable
2 Composite cable
set-top box. When you use the
satellite set-top box, connect
a dedicated cable directly to
the satellite set-top box.
Cable/Satellite
set-top box
LINE OUT
IN
VCR
OUT
VCR
LINE
IN
IN
LINE
OUT
OUT
The above is a connection example. For information on connecting external equipment to the
TV, see the operation manual of the equipment.
Connecting a PC
PC
(D-sub 15-pin cable
RGB
or
AUDIO
DVI-HDMI conversion cable
DVI OUT
The above is a connection example. For detailed information on the connection, see the
operation manual of the equipment.
ENGLISH
Back panel
vertical inputs
Back panel
horizontal inputs
Back panel
vertical inputs
surface inputs
P (Red)
R
Cable
Back panel
horizontal inputs
Splitter
When connecting the
TV without the use of
a cable/satellite set-
Back panel
top box, connect the
antenna cable to the
surface inputs
RF-IN terminal on the
VCR.
AUDIO-R (Red)
AUDIO-L (White)
Back panel surface inputs
RGB cable
or VGA cable)
ø 3.5 mm stereo
minijack cable
vertical inputs
Back panel
Y (Green)
P (Blue)
B
VIDEO
(Yellow)
Back panel
horizontal
inputs
Back panel