Supplied Accessories; Quick Reference; Attaching The Stand - Sharp AQUOS LC-70LE632U Operation Manual

Liquid crystal television
Hide thumbs Also See for AQUOS LC-70LE632U:
Table of Contents

Advertisement

Supplied Accessories

Make sure the following accessories are provided with the product.
Remote control unit
( g 1) Page 9
• Always use the AC cord supplied with the TV.
• The illustrations above are for explanation purposes and may vary slightly from the actual accessories.

QUICK REFERENCE

Attaching the Stand

• Before attaching (or detaching) the stand, unplug the AC cord.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
• Attach the stand in the correct direction.
• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1
Confi rm that there are 12 screws (8 long screws
and 4 short screws) supplied with the stand unit.
2
1 Set the post for the stand unit onto the box.
2 Attach the base to the post.
3 Insert and tighten the 8 screws into the 8 holes
on the bottom of the base.
• Hold the stand unit securely with one hand, and then
tighten the screws.
2
1
3
Insert the stand into the openings on the rear of the TV.
• Make sure that the stand is fi rmly inserted into the TV.
Improper installation may result in tilting of the TV set.
Soft cushion
8
"AAA" size battery
( g 2) Page 10
2
Long
screws
1
1
FRONT
Stand unit
Operation manual
( g 1) Page 8
4
Insert and tighten the 4 screws into the 4 holes on
the rear of the TV.
• To detach the stand, perform the steps in reverse order.
• In the installation procedure, be careful not to catch your
fi ngers between the TV set and the fl oor.
Connection guide
( g 1)
( g 1)
Short screws

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents