NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the battery.
2. Follow the procedure from step 1 to step 3 in
3. Remove the keyboard.
4. Follow the procedure from step 1 to step 7 in
5. Remove the
wireless
card.
Procedure
1. Remove the three screws (2.5x8) that secure the display hinges to the palm-rest assembly.
2. Open the display hinges to an angle of 90 degrees.
3. Peel the tape that secures the display cable to the palm-rest assembly.
4. Open the latch and disconnect the display cable.
5. Note the display cable routing and remove the display cable from the routing guides on the palm-rest assembly.
Removing the display assembly
computer. After working inside your computer, follow the instructions in
"Removing the optical
"Removing the base
drive".
cover".
Removing the display assembly
39
After
www.dell.com/
61