Installation Of Reflecting Plate; Installations With Agitation; Figure 3-8: Installation Of Reflecting Plate; Figure 3-9: Agitation - Honeywell SLN 700 User Manual

Smartline level transmitter non-contact radar

Hide thumbs Also See for SLN 700:

Table of Contents

Installation of reflecting plate

If there are barriers in the tank, the reflecting plate can be installed to reflect the echo

wave away from the sensor. If necessary, "virtual echo learning" can be turned on.

If there are agitators in the tank, the instrument should be installed as far away from

these as possible. Once the installation is completed, the "virtual echo learning" should

be carried out while the agitators are running. It will eliminate the influence of false echo

generated by mixing blades. If foam or wave is generated due to agitation, then the

customer should consider a guided wave radar sensor such as the Honeywell SLG-700

series.

Go to

https://www.honeywellprocess.com/en-

US/explore/products/instrumentation/process-level-sensors/Pages/smartline-guided-

wave-level-transmitter.aspx

SLN 700 SmartLine NCR Level Transmitter User's Manual

Page 10

Revision 2

Table of Contents