Emergency Starting Engine - Yamaha F20A Owner's Manual

Trouble Recovery
engine is running. Do not install the
starter mechanism or top cowling after
the engine is running.
Do not touch the ignition coil, spark
G
plug wire, spark plug cap, or other elec-
trical components when starting or op-
erating the motor. You could get an
electrical shock.
EMU30290

Emergency starting engine

1. Remove the top cowling.
2. Remove the start-in-gear protection ca-
ble from the starter after removing the
clip and the screw, if the cable is
equipped.
3. Remove the starter/flywheel cover after
removing the 4 bolts. Disconnect the
leads for the warning indicator.
68
4. Prepare the engine for starting. For fur-
ther information, see page 24. Be sure
the engine is in neutral and that the en-
gine stop switch lanyard lock plate is at-
tached to the engine stop switch. The
main switch must be "
equipped.
ZMU02337
ZMU02338
ZMU02649
" (on), if
ZMU02026
ZMU02334