Initial System Turn Up
Verify Blade Setup
5.15
Verify Blade Setup
Step 1
Log on the Main blade through the blade LMP interface.
Step 2
Verify that each blade is configured as intended.
Command:
> show table eqpt shelf <shelfid>
Parameter
shelf-id
Command Example:
> show table eqpt shelf 1
Output:
fujitsu@fujitsu % show eqpt shelf 1 slot 0 subslot 0 port C1
pluggableInterfaceType Client;
num-lanes 128;
admin-status up;
ains disabled;
remoteSrcPeerPort-id "";
remoteDestPeerPort-id "";
[ok][2021-05-12 09:44:03]
✓
This task is complete.
·
Release 19.1.1
Issue 1.1, May 2021
Value
<1...4>
<101,103,105,107>
<220>
<9>
Description
Shelf value for L100
Shelf value for L130
Shelf value for L200
Shelf value for L140
Fujitsu and Fujitsu Customer Use Only
199