Pioneer DDJ-SR Service Manual page 19

5
2. Check of UI parts & LED
After checking the firmware version, you can check if each UI parts (button/jog dial/knob/fader etc.) are not abnormal.
All UI parts of top&front panel are objects to check.
LED lighting specification for parts type
Parts type
Jog dial (rotate operation)
Level indicator switch
Volume knob, TEMPO slider
Channel fader
Cross fader
CROSS FADER REVERSE switch
Push switches (without LED)
Rotary selector
Push switches (with LED)
[Note]
In case of the left parts, the left parts LED are lit.
In case of the right parts, the right parts LED are lit.
In case of the center parts, the right&left parts LED are lit.
All buttons other than the Rotary selector, LED will light only while it is pressed.
5
6
UI Parts Name
Rotary selector
BACK (VIEW) button
LOAD PREPARE (AREA) button
Jog dial (touch operation) (Deck 1)
Jog dial (touch operation) (Deck 2)
SHIFT button (Deck 1)
SHIFT button (Deck 2)
DDJ-SR
6
7
Function
Turn "Level indicator" LED (*1)
Slide "Level indicator" LED (*1)
Turn "Level indicator" LED (*2)
Slide "Level indicator" LED (*3)
Slide "Beat indicator" LED (*4)
Slide "CROSS F. REV. indicator" LED (*5)
All LED (*6)
"Headphones CUE/TAP button" LED (Deck 1)
"Headphones CUE/TAP button" LED (Deck 2)
Press
Level indicator left side
Level indicator right side
"HOT CUE" LED (Deck 1)
"HOT CUE" LED (Deck 2)
Turn All LED (*7)
Press Own LED
7
8
LED to check
19
8
A
B
C
D
E
F