Makita DCL283F Instruction Manual page 16

When the mesh filter gets dirty badly, clean it in the
following procedures.
Turn the mesh filter in the direction of the arrow
1.
and remove it while the hooks are unlocked.
Fig.41
► 1 . Mesh filter 2. Hook
1
Makita Europe N.V.
Makita Corporation
www.makita.com
Remove the dust on the mesh filter and then wash
2.
it with water. After that, dry it thoroughly.
Insert the mesh filter into the base while the hooks
3.
are aligned with the port. Turn the mesh filter in the
direction of the arrow until the hooks are locked with a
click. Make sure that the mesh filter is installed securely.
2
Fig.42
► 1 . Mesh filter 2. Hook 3. Port
Jan-Baptist Vinkstraat 2,
3070 Kortenberg, Belgium
3-11-8, Sumiyoshi-cho,
Anjo, Aichi 446-8502 Japan
2
1
885A24-227
EN
20221111
3