Smeg CJF01 - Citrus Juicer Manual

Description

Product Description

1. BPA-free dust cover
2. Stainless steel reamer
3. Stainless steel filter
4. Juice collector BPA-free
5. Stainless steel anti-drip spout
6. Die-cast aluminum motor base
7. Cord storage
8. Non-slip feet

The parts that may come into contact with food are made of materials that comply with all legal provisions in force.

Use

Electrical Shock Hazard Plug into a grounded 3-prong outlet. Do not remove the ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock.

"Citrus juicer US version only"
Volts: 120 Volts AC only.
Hertz: 60 Hz

Your citrus juicer has a 3-prong grounded plug. To reduce the risk of electrical shock, this plug will fit into an outlet only one way. If the plug does not fit in the outlet, contact a qualified electrician. Do not modify the plug in any way.

• Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or service technician install an outlet near the appliance.
• A short power supply cord (or detachable power supply cord) should be used to reduce the risk resulting from becoming entangled in or tripping over a longer cord.
• Longer detachable power supply cords or extension cords are available and may be used if care is taken when using them.

If a longer detachable power supply cord or extension cord is used:

• The marked electrical rating of the power supply cord or extension cord should be at least as great as the electrical rating of the appliance.
• The cord should be arranged so that it will not hang over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally.
• If the appliance is of the grounded type, the extension cord should be a grounded 3-prong type cord.

Before first use

1. Remove any labels and stickers from the juicer.
2. Wash and thoroughly dry the juicer's components (see "Cleaning and care").

Accidental start-up hazard Make sure that the juicer is unplugged from the electrical outlet before putting on or taking off the citrus juicer's components.

How to assemble the juicer

1. Insert the juice collector (1) into the slot on top of the motor base (2).
   
2. Insert the filter (3) in the juice collector and then place the reamer (4) on top of the filter.
   

How to use the juicer

1. Cut the citrus fruit in half.
   
2. Place the juicer on a flat, dry surface.
3. Open the anti-drip spout (5) by lowering it and place a glass or other container beneath it.
   
4. Plug the cord into the outlet.
5. Press the citrus half on the reamer, making sure the anti-drip spout is open. The motor will start automatically.
   
6. Once you have finished juicing, remove the fruit from the reamer to automatically stop the engine and close the anti-drip spout (5).
   

Moving parts Risk of injury or damage to the appliance Do not operate the juicer for more than 3 minutes at a time. Allow it to cool and wait 15 minutes before starting again. Do not insert fingers, forks or spoons in the spout. This could cause personal injury or damage the appliance. Keep hands, hair, necklaces, ties, spatulas or other objects away from the juicer's reamer and filter to avoid personal injury or damage to the appliance. Do not grasp the reamer or the filter with your hands while the juicer is plugged in.

• Do not overfill the juice collector.
• To keep the white and bitter parts of the fruit's peeling from being pressed into the juice, do not push too hard on the reamer.
• Make sure the spout is not blocked.
• Avoid leaving dry pulp residues on the juicer's surfaces.
• Do not use hard or sharp objects to remove pulp to avoid scratching and damaging the filter or the reamer.

Cleaning and care

Instructions

Misuse Electrocution hazard Unplug the citrus juicer before cleaning. Do not immerse the motor base in water or other liquids.

Misuse Risk of damage to surfaces Do not use steam jets to clean the appliance. Do not use cleaning products containing chlorine, ammonia or bleach on parts with metallic surface finishes (e.g. anodizing, nickel- or chromium-plating). Do not use abrasive or corrosive detergents (e.g. powder products, stain removers and metal scouring pads). Do not use rough or abrasive materials or sharp metal scrapers.

Cleaning the motor base

To maintain the outer surfaces, you must clean them regularly after each use and after letting them cool down. Clean with a soft damp cloth and mild detergent.

Cleaning the components of the citrus juicer

The reamer, cover, the filter and the juice collector can be cleaned in the dishwasher.

Thoroughly dry the components, being careful to replace the dust cover when the appliance is not in use.