Grounding - AEG ACM 9 Manual

Manual ACM 9 - ARE i9 release
Digital Inputs (input)
M12 socket 8-Pin male A-coded
Digital outputs (output)
M12 socket 8-Pin female A-coded

2.1.4 Grounding

Manual ACM9_ARE i9 release V10.docx
PIN 1 – Input for serial port 1
PIN 2 – Input for serial port 2
PIN 3 – Input for serial port 3
PIN 4 – Input for serial port 4
PIN 5 –7: not connected
PIN 8 - Input GND
LED : on, when any input is active
Input voltage 6..24VDC
Cable: M12, 8-pin A-coded socket to plug
PIN 1 – Output for serial port 1
PIN 2 – Output for serial port 2
PIN 3 – Output for serial port 3
PIN 4 – Output for serial port 4
PIN 5 – 7: not connected
PIN 8 – External output voltage
connected through PIN 1/2/3/4
LED : on, when any output is active
Switched voltage max: 125VAV / 60VDC
Switched current max: 1A | power max: 24W
Cable: M12, 8-pin A-coded plug to socket
Grounding ACM 9 is important for proper
functionality.
Grounding can be achieved in two ways:
1. Grounding via DIN hat rail clamp
The metal DIN hat rail clamp is connected
to internal ground of ACM 9. Grounding
DIN hat rail in machine will connect
internal ground to machine ground.
2. Use grounding pin on upper left side
(viewed from back).
Hook up machine ground to grounding
pin
Version: 10
Page: 9 / 51
PIN 1/2/3/4
6...24VDC
PIN 8
PIN 8
Max: 125VAC / 60VDC
Max: 1A
Max: 24W
PIN 1/2/3/4