Related Manuals for AEG WIFI200
Summary of Contents for AEG WIFI200
- Page 1 PL201708 EN LIMITED PRODUCT WARRANTY SOLAR INVERTERS - V. 1. 0 AEG WIFI200 WIFI STICK INSTALLATION MANUAL Solar Solutions GmbH | Schneckenhofstrasse 19 | 60596 Frankfurt am Main | Germany | www.aeg-industrialsolar.de...
- Page 2 AEG InverterControl Monitoring Webportal). The AEG WiFi200 is used (at the time of writing) with mono-phase inverters of the series AS-IR01 and AS- IR01-2, and with three-phase inverters of the series AS-IC01 and AS-IC01-2. The AEG WiFi200 can only be installed by qualified professional companies.
-
Page 3: Table Of Contents
1. Safety Precautions ............................................... 3 2. Unpacking ................................................... 3 3. Introduction to AEG WiFi200........................................... 3 3.1 Product function and compatibility with AEG inverters ..........................3 3.2 Local monitoring and Remote monitoring................................4 4. Installation and Configuration of AEG WiFi200 ................................4 4.1 Product looks and fitting position ..................................... -
Page 4: Safety Precautions
Double-check the order information and the product nameplate to ensure the consistency of the order. Please keep the packaging of your AEG WiFi200, especially the cardboard box. On the box you will relevant information such as the Serial Number and the Product Key which are needed for completing specific configuration processes as explained in 4.3 “Configuring the AEG WiFi200”. -
Page 5: Local Monitoring And Remote Monitoring
WLAN. To set up Local Monitoring you will need to connect the AEG WiFi200 (WiFi Stick), your (home) WLAN router and the AEG InverterControl app; or, you can establish a direct connection between the AEG WiFi Stick and the AEG InverterControl app. -
Page 6: Installing The Aeg Wifi200
Fasten up the AEG WiFi200 (WiFi Stick) to the RS 485 communication port of your inverter. Wait until the hotspot “AEG” can be found. You will be able to check if the AEG hotspot was successfully set up by checking on your mobile phone or on your PC phone the available wireless networks. - Page 7 The AEG WiFi200 has four possible configuration procedures, two for Local Monitoring and two for Remote Monitoring. Here below is an overview of which they are and which components are involved. Monitoring Type Configuration Type Scheme and Components Local Monitoring (#1)
-
Page 8: Local Monitoring (#1): Direct Connection Via Mobile Phone
4.3.1 Local monitoring (#1): Direct connection via mobile phone On your mobile device, download the AEG InverterControl App from the App Store / Google Play (look for “AEG InverterControl” in the App Store/Google Play application on your mobile) and launch it Enable the WiFi on your mobile phone and connect it to the hotspot “AEG WiFi”. - Page 9 Click on the “Parameters” section Check the parameters. Done! You can now start to monitor the performance of your AEG Inverter with the AEG InverterControl App. PD201802 AEG WIFI200 INSTALLATION MANUAL V.1-18 EN...
-
Page 10: Local Monitoring (#2): Configuration Via Pc + Home Wifi (Lan)
Network Mode: Leave it as “Server”. Click “Apply” to save the changes. On your mobile phone, download the AEG InverterControl App from the App Store / Google Play (Look for “AEG InverterControl” from the App Store/Google Play on your mobile) and launch it Enable the WiFi on your mobile phone and connect it to the hotspot of your router. - Page 11 WiFi stick and your router works correctly, connect your mobile phone to the wireless network of your router and select “WiFi Setting”. If you can find the WiFi200 and the corresponding parameters, it means the setting is correct. PD201802 AEG WIFI200 INSTALLATION MANUAL V.1-18 EN...
-
Page 12: Registering A Remote Monitoring Account
4.3.3 Registering a Remote Monitoring Account Monitoring the performance of your AEG inverter from remote requires you to set up the AEG WiFi200 for Remote Monitoring and preliminarly registering a Remote Monitoring Account. You will be able to register your Remote Monitoring Account via: A) The AEG InverterControl App. - Page 13 Please make sure you select a User Name without special characters / blank spaces. Confirm the information and finalize the registration. B) Registering over the AEG InverterControl Monitoring Webportal Go to the AEG InverterControl Monitoring Webportal page www.invertercontrol.com. Click on “Register”...
-
Page 14: Remote Monitoring (#1): Configuration Via Mobile Phone + Internet Access
Make sure that the Timezone is correctly selected. Fill in the plant data and click “Confirm” to complete the registration. You can now proceed to configure the AEG WiFi Stick for Remote Monitoring. 4.3.4 Remote monitoring (#1): Configuration via mobile phone + internet access On your mobile phone, download the AEG InverterControl App from the App Store / Google Play (look for “AEG... - Page 15 Click “+” to add a new plant. Fill in the required data and confirm with “OK” Now add the AEG WiFi200 (WiFi Stick): select your plant and click on the Plant or “” PD201802 AEG WIFI200 INSTALLATION MANUAL V.1-18 EN...
- Page 16 WiFi Sticks. Now set the parameters of the WiFi stick for remote monitoring. Enable the WiFi on your mobile phone and connect it to the hotspot “AEG WiFi”. PD201802 AEG WIFI200 INSTALLATION MANUAL V.1-18 EN...
- Page 17 Click the “search” (lens) icon to find the WiFi Stick. Alternatively, click the “+” icon and confirm the IP address. Find the AEG WiFi Stick in the list and click on it. Select and set the parameters as indicated here:...
- Page 18 WiFi stick and your router works correctly, connect your mobile phone to the wireless network of your router and select “WiFi Setting”. If you can find the WiFi200 and the corresponding parameters, it means the setting is correct. If the setting is not correct, please reset the WiFi stick and set...
-
Page 19: Remote Monitoring (#2): Configuration Via Pc+ Internet Access
Remote Server Domain: 14.215.130.186 Click “Apply” to save the changes. Allow 15 minutes to update Now you have to possibilities for continuing the setup: either via the AEG InverterControl App, or via the AEG InverterControl Monitoring Webportal. PD201802 AEG WIFI200 INSTALLATION MANUAL V.1-18 EN... - Page 20 If you wish to use the AEG InverterControl App, continue reading from instruction point number 5 below. If you wish to use the AEG InverterControl Monitoring Webportal, skip to instruction point number 17 below. On your mobile device, download the AEG InverterControl App from the App Store / Google Play (Look for “AEG...
- Page 21 Fill in the required data and confirm with “OK” Now add the AEG WiFi200 (WiFi Stick): select your plant and click on the plant or on “” Click on “Device Info” Click on Collector “+” to add a WiFi Stick Input the Name of a WiFi Stick, along with its Serial Number and Key which you will find on the product packaging.
- Page 22 (WiFi Stick) in your plant, repeat the operation from step 12 to 15 Please follow the below instructions if you are completing the configuration via the AEG InverterControl Monitoring Webportal Login in the AEG InverterControl Monitoring Webportal at www.invertercontrol.com using your Remote Monitoring Account.
-
Page 23: Resetting The Aeg Wifi200
19 to 20. 5. Resetting the AEG WiFi200 If malfunctioning occurs during operation of the AEG WiFi200, or if the settings are not properly adjusted, reset the AEG WiFi200 by pressing and holding the reset button for 5 seconds.