Copy Card Reader-F1; Super G3 Fax Board-Ax1 - Canon imageRUNNER ADVANCE DX C5870i Manual

Canon

7.12 Copy Card Reader-F1

Item
Available Cards
Card Readout Method
Magnetic Card Reading
Direction
Store/Replay
Power Source
Dimensions (W x D x H)
Weight

7.13 Super G3 FAX Board-AX1

Protocol
Telephone Line Used
Scan Line Density
(Scan, Transmission)
Transmission Speed
Compression Method
Transmission Type
Sending Original Size
Receiving Paper Size
Transmission Times
Number of Memory
Receive Jobs
29 Excludes the attachment kit and cable.
30 The specifications remain the same even when the optional Super G3 2
3 rd /4 th Line Fax Board-AX1 is installed.
31 If the user uses an IP telephone service, facsimile communications may not be performed normally via an IP
telephone line. It is recommended to use a general telephone (Public Switched Telephone Network) line for
facsimile communications.
32 Pels stands for picture elements (pixels).
Revision 6 imageRUNNER ADVANCE DX C5800 Series Customer Expectations Document
imageRUNNER ADVANCE DX C5800 Series Customer Expectations Document
Magnetic
Magnetic readout
Face up
Replay
From the main unit.
29 3 1/2" x 3 3/4" x 1 5/8" (88 mm x 96 mm x 40 mm)
Approximately 7.1 oz (200 g) (Includes the attachment kit and cable.)
31 Public Switched Telephone Network
Standard: 8 pels
Fine: 8 pels
Super-Fine: 8 pels
Ultra-Fine: 16 pels
Super G3: 33.6 kbps
G3: 14.4 kbps
MH, MR, MMR, JBIG
Super G3, G3
11" x 17" to STMTR
11" x 17" to STMTR
JBIG: Approximately 2.6 seconds
Up to 320 jobs
Specifications
Specifications
/mm x 3.85 line/mm
32
32 /mm x 7.7 line/mm
32 /mm x 15.4 line/mm
/mm x 15.4 line/mm
32
nd Line Fax Board-AX1 or Super G3
30
Page 68