Copy Card Reader-F1
Points to Note at Installation
NOTE:
Although model with the Card Reader-C1 is used for illustration in this procedure, the
same procedure is applied to model with the Copy Card Reader-F1.
Caution:
To install the Card Reader-C1, the Card Reader Mounting Kit-B2 is required.
Checking the Contents
■ Card Reader-C1/Copy Card Reader-F1
[1] Card Reader Unit X 1
[2] Screw
(RS tight; M4x10) X 1
9
Installation > Copy Card Reader-F1 > Checking the Contents > Copy Card Reader Mounting Kit-B2
■ Copy Card Reader Mounting Kit-B2
[3] Toothed washer X 1
F-9-105
9
Installation > Copy Card Reader-F1 > Checking the Contents > Copy Card Reader Mounting Kit-B2
[1] Card Reader Mounting
[2] Card Reader Mounting
Plate (front) Unit X 1
Plate (rear) Unit X 1
[4] Card Reader Relay
[5] Connector Cover X 1
Unit X 1
[7] Cord Guide X 2
[8] PCB Spacer X 1
[10] Screw (TP; M3x6) X 5
[11] Screw
(Bind; M4x6) X 4
9-49
[3] Card Reader Mounting
Plate (lower) Unit X 1
[6] Card Reader External
Relay Harness X 1
[9] Wire Saddle X 1
[12] Screw
(TP; M4x12) X 2
F-9-106
9-49