Canon
II.
Hardware Accessory Options
Canon-Branded paper feed, accessories and finishers for the imageRUNNER
ADVANCE DX 8700 Series.
Refer to the Appendix to see the specifications for the hardware accessory options.
A.
Printer Cover-H2
•
Printer Cover-H2 is installed in place of the Duplex Image Reader when
this machine is used as a printer model.
This option requires removing the standard Single Pass Duplexing
•
Automatic Document Feeder and Color Image Reader.
B.
Paper Deck Unit-E1
Provides an additional paper capacity of approximately 3,660 sheets
•
(20 lb bond (75 g/m
Supports LTR-sized paper only.
•
•
Supports paper weights up to 140 lb index (256 g/m
•
Cannot be installed with the POD Deck Lite-C1.
C.
POD Deck Lite-C1
Provides an additional paper capacity of approximately 3,660 sheets
•
(20 lb bond (75 g/m
•
Supports paper sizes up to 11" x 17".
Supports paper weights up to 140 lb Index (256 g/m
•
Cannot be installed with the Paper Deck Unit-E1.
•
D.
Tab Feeding Attachment Kit-B1
Enables printing on tab paper from Paper Drawer 3 or Paper Drawer 4.
•
One Tab Feeding Attachment Kit is included with the imageRUNNER
•
ADVANCE.
E.
Copy Card Reader-F1
Enables Department ID Management using a control card. End-users are
•
required to authenticate using a control card before starting an operation.
Up to 1,000 Department IDs can be registered.
•
Requires the optional Copy Card Reader Attachment-A4.
•
F.
Upright Control Panel-J1
The upright control panel features a pressure type 10.4" SVGA Full-Color
•
touchscreen.
The user can adjust the position and angle of the control panel to enable
•
efficient operation.
imageRUNNER ADVANCE DX 8700 Series Service Guide
Revision 7
imageRUNNER ADVANCE DX 8700 Series Service Guide
2
)).
2
)).
2
).
2
).
March 2023
Page 13