Auxiliary Mode; Operation Condition; Smart Network Function; Tips On Saving Energy - Sharp AH-XP10YH Series Operation Manual

AUXILIARY MODE

Use this mode when the remote con-
trol is not available.
TO TURN ON
Press the ON/OFF button.
• The OPERATION lamp( ) will light
up and the unit will start operating in
the AUTO mode.
• The fan speed and temperature set-
ting are set to AUTO.
TO TURN OFF
Press the ON/OFF button again.
• The OPERATION lamp ( ) will turn
off.

OPERATION CONDITION

OPERATION CONDITION
Mode Indoor Temp. Outdoor Temp.
Cooling Above 21°C
• The build-in safety device may
prevent the unit from operating even
if not reach the setting temperature
when used out of this range.
• Condensation may form on the air out-
let if the unit operates continuously
in the COOL or DRY mode when
humidity is over 80%.
OM B088 EN+TH+VN+CS.indb 6

SMART NETWORK FUNCTION

(For premium models only)
Pairing the mobile device with the
air conditioner by wireless LAN,
you can operate the air conditioner
and monitor the condition of the air
conditioner by the mobile device.
Please refer to the "wireless LAN
guidebook" to get more information
about the wireless LAN pairing.
ON/OFF
button

TIPS ON SAVING ENERGY

Below are some simple ways to save
energy when you use your air conditioner.
Set the proper temperature
• Setting the temperature lower than
necessary during cooling operation will
result in increased power consumption.
Block direct sunlight and prevent drafts
Above 21°C
• Blocking direct sunlight during cooling
and
operation will reduce power consumption.
below 43°C
• Close the windows and doors during
cooling operations.
Keep filter clean to ensure the most
efficient operation
Disconnect the power cord when the
unit is not used for an extended period
time
• The indoor unit still consumes a small
amount of power when it is not operating.
EN-6
WLAN
The green lamp will
wireless
light up when the
LAN
pairing succeed.
2022/6/21 13:16:18