Figure - Cisco 7541 Hardware Installation Manual

Rack Mounting and Cabling the WAVE-7541, WAVE-7571, and WAVE-8541

Figure 3-1

Step 4
Attach the rear mount bracket holders (item #3 in
rack screws (item #6 or #7 in
Figure 3-2
Step 5
Insert the chassis between the mounting posts and secure (see
a.
Insert the chassis into the rack with the rear rack mount holders sliding into the rear rack mount
brackets.
b.
Align the mounting holes in the front brackets with the mounting holes in the equipment rack.
c.
Secure the chassis using four (two on each side) rack screws (item #6 or #7 in
the holes in the front brackets and into the threaded holes in the mounting post.
Cisco Wide Area Virtualization Engine 7541, 7571, and 8541 Hardware Installation Guide
3-4
Chapter 3
Attaching the Brackets
Table 3-1). (see
Attaching Rear Rack Mount to the Rack
Installing the WAVE-7541, WAVE-7571, and WAVE-8541
Table 3-1) to the rear rack posts using four appropriate
Figure 3-2)
Figure 3-3):
Table 3-1) through