Table of Contents
Advertisement
Available languages
Available languages
English
Putting the Lanyard On (Fig. A, G)
nOTE: When using in cool mode, wear well‑ventilated clothing and ensure the air vent
is facing up out of the top of the shirt. If the air vent is covered when in cool mode, the unit
may overheat.
1. Insert the unit into the 360‑degree lanyard
Lanyard section.
2. Place the lanyard around your neck so the cooling/heating plate
3. Insert the lanyard connector
4. Let go of the lanyard. The ComfortPak will now stay in place.
MAINTENANCE
Your BLACK+DECKER product has been designed to operate over a long period of time
with a minimum of maintenance. Continuous satisfactory operation depends upon proper
appliance care and regular cleaning.
Cleaning
WARNING: Never use solvents or other harsh chemicals for cleaning the product. These
chemicals may weaken the plastic materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid get inside the product; never
immerse any part of the product into a liquid.
Accessories
WARNING: Since accessories, other than those offered by BLACK+DECKER, have not been
tested with this product, use of such accessories with this product could be hazardous. To
reduce the risk of injury, only BLACK+DECKER recommended accessories should be used
with this product.
Recommended accessories for use with your product are available at extra cost from your
local dealer or authorized service center. If you need assistance in locating any accessory,
please contact BLACK+DECKER, call 1‑800‑544‑6986
Repairs
The product and charging cable are not serviceable. There are no serviceable parts inside the
product or charging cable.
10
10
12
into the lanyard connector hole
as described in the Inserting Into
4
sits directly on the skin.
13
.
7
Advertisement
Table of Contents
