Buffalo CU489 Instruction Manual page 3

• Keep all packaging away from children. Dispose of the
packaging in accordance to the regulations of local authorities.
• Always switch off and disconnect the power supply to the unit
when not in use, before cleaning and service.
• If the power cord is damaged, it must be replaced by a
BUFFALO agent or a recommended qualified technician in
order to avoid a hazard.
• Buffalo recommends that this appliance should be periodically
tested (at least annually) by a Competent Person. Testing
should include, but not be limited to: Visual Inspection,
Polarity Test, Earth Continuity, Insulation Resistance and
Functional Testing.
• Buffalo recommend that this product is connected to a circuit
protected by an appropriate RCD (Residual Current Device).
• The appliance is NOT approved for filtration of liquids other
than frying oil.
• DO NOT use or store outdoors! Damage may occur due to rain
or moisture.
• Children are strictly prohibited from using the appliance!
• DO NOT touch the power cord and control unit with wet
hands!
• DO NOT pinch or bend the power cord!
• DO NOT let the power cord come into contact with hot oil or
other hot objects.
• Operate the appliance only on protection class I connections
(with protective earth contact).
• Clean the appliance before initial use (see chapter "Cleaning,
Care & Maintenance").
• The local voltage must match the voltage on the type plate.
• The maximum operating temperature is 200°C (recommended
frying temperature 175°C).
CU489_EN_A5_v1_20230414.indb 3 CU489_EN_A5_v1_20230414.indb 3
EN
3
2023/4/14 09:57 2023/4/14 09:57