Cisco Firepower 1010 Getting Started page 11

Hide thumbs Also See for Firepower 1010:

Getting Started

Procedure

Step 1

Select Profile from the user icon drop-down list in the upper right of the menu.

Step 2

Click the Password tab.

Step 3

Enter your current password.

Step 4

Enter your new password and then confirm it.

You can click Generate to have a random 16 character password generated for you. Click the Show Password

(

password in the confirmation field.

Step 5

Click Change.

Setting User Profile Preferences

You can set preferences for the user interface and change your password.

Procedure

Step 1

Select Profile from the user icon drop-down list in the upper right of the menu.

Step 2

On the Profile tab, configure the following and click Save.

• Time Zone for Scheduling Tasks—Select the time zone you want to use for scheduling tasks such as

• Color Theme—Select the color theme you want to use in the user interface.

Step 3

On the Password tab, you can enter a new password and click Change.

Setting Up the System

You must complete an initial configuration to make the system function correctly in your network. Successful

deployment includes attaching cables correctly and configuring the addresses needed to insert the device into

your network and connect it to the Internet or other upstream router. The following procedure explains the

process.

) button to see the passwords unmasked. Then, click the Copy To Clipboard link so you can paste the

backups and updates. The browser time zone is used for dashboards and events, if you set a different

zone.

Setting User Profile Preferences

Getting Started