Hitachi ChromasterUltra Rs 6270 Instruction Manual page 195

ChromasterUltra R
S
6310 Column Oven
Appended Fig. 1-14 USB Cable Connection
Appended Table 1-3 Cables to be Used
USB cable 1)
USB cable 2)
(2) USB Cable Connection
ChromasterUltra R
6170 Binary Pump
P/N 889-6101 (accessory)
P/N 889-6101 (accessory)
NOTE:
Connect the DAD data transmission cables (USB 2.0
cable) between the USB connector on the back side of
the instrument and the interface control board (IFC
board).
If it is connected improperly between the USB
connector on the back side of the instrument and the
PC, the Driver Installation Screen (Appended Fig. 1-15),
which is wrong, appears and disables the connection
between the PC and the instrument.
In this case, close the Driver Installation Screen and
check the connection of the DAD data transmission
cable (USB 2.0 cable).
APPENDIX 1 - 19
ChromasterUltra R
Organizer
Inter Face Control Board
1)
ChromasterUltra R
6420 UV-VIS
ChromasterUltra R
6430 DAD
ChromasterUltra R
6270 Autosampler
2)
ChromasterUltra R
S
6440 FL Detector
To the USB connector of the PC
S
S
S
S
S