Vials - Hitachi ChromasterUltra Rs 6270 Instruction Manual

7.2 Sample Racks

7.3 Vials

NOTE:
Performance specification should be checked in the
following combination. Avoid using the non-slit septum or
the sealed plastic cap to acquire original good
reproducibility performance.
Part No.
080-3595
855-2351
080-3704
In the other cases (refer to Table 7-4 to 12), adjust the
rack parameters according to the combination used for
your practical application, and check the reproducibility
performance before proceeding to operation.
NOTE:
For good reproducibility, avoid using a septum repeatedly
to prevent a cause of a hole. It causes a fluctuation of
sample concentration in sample vial.
NOTE:
Be sure to use the sample vials, caps and septa
recommended by Hitachi High-Tech Science (indicated in
Table 7-4 to 12).
If other parts are used, the instrument may malfunction or
its original performance may not be available.
7 - 9
Part Name
1.5 mL sample vial
Septum (Si -TEF), Slit (-)
Screw cap