Test Memory Messages - Bosch FPC-500 Installation Manual

Conventional fire panel
Message
Relays Disabled Relays disabled.
Battery Fault
Battery Restore Battery power supply was restored.
Mains Fault
Mains Restore
Sys Load Fault
Sys Load
Normal
System Fault
Panel boot-up
Reset Panel
Night Mode
Day Mode
Earth Fault
Earth Normal
Level Enter
Level Exit
Silenced
Unsilenced
7.6

Test Memory Messages

Message
Zone Start
Zone Test
Bosch Sicherheitssysteme GmbH
Meaning
Fault in the battery power supply.
Fault in the 230 V power supply.
230 V power supply was restored.
Current consumption of panel and all
connected peripherals is above 3.5 A.
Current consumption is back in permitted
range.
System fault
Panel has been restarted.
Panel has been reset.
Panel has switched to night mode.
Panel has switched to day mode.
Grounding fault.
Fault in grounding resolved.
Operating level # entered.
Operating level # exited.
An alarm has been silenced.
A silenced alarm has been reactivated.
Meaning
Zone # set to test mode.
Zone # successfully tested.
Appendix | en
2020.02 | 9.0 | F.01U.172.980
73