Canon imagePRESS Server G250 V2 Service Manual page 95

13.
14.
CAUTION:
Be sure to use the network cable with Category 5e or
higher.
In addition, a shielded type (STP cable) is
recommended. When using the non-shielded type
(UTP cable), it may influence the surrounding
electronic equipments via network cable.
1x
15.
Straight Ethernet
Cable (3.0 m)
(for network connection)
16.
17.
18.
19.
89
6. INSTALLATION PROCEDURE
CAUTION:
Use the correct power cord to match the location/area
of installation. Make sure not to leave unused power
cord at the site.
2x
Connect the power plug to the outlet of the host
machine.
Connect the power plug to the outlet of the
imagePRESS Server.
CAUTION:
Be sure to use an outlet of a system different from that
of the host machine.
After turning ON the imagePRESS Server power,
turn ON the main power switch of the host machine.
When the message "Turn ON the main power of the
host machine again." is displayed on the Touch
Panel, turn OFF the main power switch.
1x