Firefighter's Handset Installation - Honeywell Farenhyt Series Manual

Installation
2. Using a 1/4" hex driver, remove the six hex nuts that hold the cabinet door in place.

Re-Attaching the Cabinet Door
To re-attach the cabinet door:
1. Using a 1/4" hex driver, secure the six hex nuts to hold the cabinet door in place.
2. Using a Phillips head screwdriver, install the six screws to hold the dead front panel in place

3.2 Firefighter's Handset Installation

To install the FFT local handset:
1. Insert the phone cord through the hole of the dead front panel.
10
Dead Front
Panel Screws
Figure 3.4 Cabinet Door and Dead Front Panel Removal
Figure 3.5 Handset Cord Inserted Through Dead Front Panel Hole
Cabinet Door
Dead
Front Panel
Cabinet Door
Hex Nuts
IFP-FFT Manual — P/N 54708:B3 10/28/2021
Firefighter's Handset Installation