Black & Decker BDXCTSH1 Installation & Operation Manual page 9

INSTALLING THE THERMOSTAT
INSTALL MOUNTING PLATE (with WALL PLATE if required)
Use the included screws and wall anchors (if required) to attach the Mount-
ing Plate to the wall, making sure the wires go through the center opening.
Note the correct position indicated by the UP arrows molded into the
plastic.
To cover paint or screw holes on the wall behind the thermostat, insert
the Wall Plate between the Mounting Plate and the wall as shown. Both
plates are secured with the same screws.
Note: Use 3/16" drill for wall
anchors if no stud is present.
Note: See Appendix E
for optional junction
box mounting.
5