Important Safety Instructions - Black & Decker BDXCTSH1 Installation & Operation Manual

IMPORTANT SAFETY INSTRUCTIONS

WARNING: Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock,
fire and/or serious injury.
WARNING: Never modify this product. Damage or personal injury could
result.
WARNING:
• Follow all applicable electrical codes and regulations regarding the
installation or replacement of a thermostat in the local jurisdiction.
In the absence of local requirements, follow ANSI/NFPA 70, National
Electric Code. In some cases, an authorized installer may be required.
Consult a qualified electrician or HVAC technician with any questions
about the installation of this product.
• DO NOT connect any of the terminals to voltage above 30 VAC.
The Thermostat uses 24 VAC nominal power.
• DO NOT cover any of the vents on the thermostat.
• DO NOT install this unit at an altitude of over 6550 feet (2000 meters).
• DO NOT install this unit in a bathroom or area of excessive moisture.
• DO NOT allow the unit to get wet. This temperature control device is
intended only for dry, closed living and office spaces.
• DO NOT expose this device to temperatures below 14°F (-10°C) or
above 140°F (60°C).
• DO NOT operate or store this thermostat in areas where the relative
humidity exceeds 90%.
• DO NOT expose the unit to voltage fluctuations more than +/- 10%.
• DO NOT use solvents or aggressive cleaning agents. A dry, soft cloth is
recommended.
The manufacturer does not accept responsibility for any damage caused by
not following these instructions.
ii