Black & Decker BDXCTSH1 Installation & Operation Manual page 20

THERMOSTAT PARAMETERS
MENU
TEXT
Frost
Protection
-6F (-3.0C)
Temp
Calibration
Backlight
Color
Backlight
Timeout
Auto
Recovery
0.5F (0.25C)
Span
3.0F (1.5C)
Deadband
Setback
Offset
16
OPTIONS
NO
Call for heat will be initiated if temperature drops
below 41°F (5°C) NO = Disable, YES = Enable
YES
Calibrate temperature reading by offsetting the dis-
to play by -6°F to 6°F (-3.0°C to 3.0°C) in 1°F (0.5°C)
6F (3.0C) increments. Default = 0
NO Backlight (Always = White)
YES Backlight (Off = White, Heat = Red, Cool = Blue)
NO Constant Backlight
YES Backlight timeout after 20 seconds
NO
Gradually increases set point after setback
NO = Disable, YES = Enable
YES
Control variable that affects thermostat response
to
time. A larger number slows response time.
4F / 2C
Allowable temperature difference between Auto
3F / 1.5C mode heating and cooling set points.
Default = 4°F (2.0°C)
2F / 1C
4F / 2C
Difference between the set point in non-program-
8F / 4C mable mode and the setback temperature. Used to
reduce energy usage.
12F / 6C
DESCRIPTION