Product Overview; Features; Access Control System Compatibility - GE Security 240 Installation Manual

Product Overview

Features

• Universal compatibility with all ISO 15693 and ISO 14443A
credentials (badges, disc tags, and key fobs).
• Supervised four-state (open, closed, wire cut, and wire short)
monitoring for door contacts, REX (request to exit).
• Electrical protection (reverse polarity diode protection on power
lines).
• Data lines; high-speed transient voltage suppressor diodes.
• Compatible with Micro/5 2RP and 8RP Reader Processor boards,
Micro/PX-2000, and Micro/PXN-2000 controllers.
• IP 65-rated sealed electronics for deployment in both interior and
exterior environments.
• Integrated reader tamper protection and supervised data
communications.
• Reads the serial BID (badge ID) number of all ISO 15693 and ISO
14443A credentials.
• 12-button tactile membrane keypad (3 x 4 matrix) for PIN (personal
identification number) entry (Model 245 only).

Access Control System Compatibility

The Model 24x badge reader outputs a 16-digit badge identification (BID)
number. As a result, the Model 24x readers are compatible with Picture
Perfect while microcontrollers on a Secure Perfect 4.0 system must be
field-configured for Model 24x compatibility.
Picture Perfect Edition Setup
Refer to Access/Badge Formats or to the Picture Perfect online help for
assistance. A 16-digit BID format must be defined within Picture Perfect.
Enter a suitable badge format description. Example:
and define the format:
Secure Perfect Edition Setup
Secure Perfect 5.0 supports badge IDs (BIDs) to a maximum of 20 digits.
Secure Perfect 4.0 supports badge IDs (BIDs) to a maximum of 12 digits.
Since the Model 24x Contactless Reader outputs a 16-digit number, the
Secure Perfect 4.0 microcontrollers must be configured to receive the
.
%16S
GE Contactless Reader Model 24x/250
16-digit BID
5