MA grandMA3 User Manual

grandMA3 User Manual – Device Overview – Control elements
Version 1.2 – 2022-11-24
English
Dual encoders
The five dual encoders are used to adjust the different attributes of the fixtures. There are four different actions on the
encoders:
Turn the inner ring to adjust the attribute "Coarse".
Turn the outer ring to adjust the attribute "Fine".
Press the inner ring to open a calculator to type in the value.
Press and turn the inner ring to adjust the attribute "Coarse" with a higher speed.
Press the dual encoder key to open a calculator to type in the value. The dual encoder key replaces the press function
of the outer ring.
Hint:
If Dimmer is the selected attribute, the inner ring adjusts with 1 percent per click and the outer ring adjusts
with 0.01 percent per click.
These encoders are placed above the command section.
Location on grandMA3 full-size and grandMA3 light consoles​
© 2022 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-30 - support@malighting.com - www.malighting.com
1 of 3