MA grandMA3 Quick Start
Hide thumbs
Also See for grandMA3:
- Quick manual (133 pages) ,
- User manual (8 pages) ,
- Installation manual (6 pages)
Related Manuals for MA grandMA3
Summary of Contents for MA grandMA3
- Page 1 Quick Start 1. Master section 2. Dual encoder section 3. Power key 4. Command section 5. Level wheel 6. Executor buttons 1&2...
- Page 2 Do not press the power key to turn off the device. Only if a hard shutdown is necessary, press and hold the power key for more than 3 seconds. To turn off the grandMA3 onPC command wing XT: -Tap the icon at the top of the control bar to begin the shutdown procedure for the console or the onPC application or shutdown the onPC software by the shutdown keyword .
- Page 3 Do not switch off the grandMA3 onPC command wing XT too early. Make sure that you wait until Windows has completely shutdown. All LEDs on the grandMA3 onPC command wing XT must have turned off. -Set the power switch to position O .
- Page 4 Important: You can disconnect the grandMA3 onPC command wing XT using the grandMA3 onPC software. The DMX output will then be interrupted immediately. Different Combinations Device Connected To Parameters grandMA3 onPC command wing XT + PC/laptop 4 096 grandMA3 onPC command wing XT +...