Working In Self-Leveling Mode - AEG CLG220 Original Instructions Manual

WORKING IN SELF-LEVELING MODE

WORKING IN SELF-LEVELING MODE
In self-leveling mode the cross laser will level itself in a ±3° range and can project a
horizontal beam, a vertical beam (CLR215 only) or both beams simultaneously.
1
Place the cross laser on a solid
 at vibration free surface or on a
tripod.
2
Slide locking switch to the ON
position.
3
The cross laser will generate
2 laser beams.
- vertical beam forward
- horizontal beam forward
The cross laser will generate
forward cross beam when all
beams are activated.
ENGLISH
9
1/4" male thread