Makita DCX200 Instruction Manual page 11

Lighted
(For LXT batteries only)
(For LXT batteries only)
battery protection system works.
Battery BL1055B
While the battery BL1055B is unplugged, press the
power button. The battery capacity indicator lights up
for a few seconds.
1. Power button 2. Battery capacity indicator
Lighted
If the remaining battery capacity is too low, the device
capacity
will not operate. When you turn the device on, the
power is supplied to the heating parts again, but stops
soon. In this situation, remove and recharge the battery
75% to 100%
cartridge.
50% to 75%
25% to 50%
CAUTION:
compatible with the USB power supply port. Not
doing so may cause a malfunction.
Less than
25%
NOTICE:
Charge the
battery.
doing so may cause a loss of your data.
NOTICE:
The battery
may have
malfunctioned.
devices.
NOTICE:
the USB device to be connected.
not in use.
cession, wait about 10 seconds after charging of the
previous device has completed before beginning to
charge the next device.
The battery holder (with the battery) and Battery
BL1055B can work as an external power supply for
USB devices.
capacity
1. Open the cover and connect a USB cable (not
included) to the USB port. Then connect the other end
of the cable to the device.
50% to 100%
2. Start charging:
— When using battery holder (with the battery), press
25% to 50%
and hold the power button until the power level
indicator lights up. The battery supplies DC 5 V,
10% to 25%
2.4 A.
Less than
10%
— When using Battery BL1055B, press the power
Battery
button. The battery supplies DC 5 V, 1.5 A.
abnormality
Battery BL1055B
11 ENGLISH
The actual output current varies depending on
Battery power is consumed while the power
When charging multiple USB devices in suc-
1. Power button 2. USB port
1. Power button 2. USB port
Not