Configure Nat (Network Address Translation) Settings - HIKVISION DS-2CD2786G2-IZS User Manual

2. Set the ports of the camera.
HTTP Port: The default port number is 80, and it can be changed to any port No.
that is not occupied.
RTSP Port: The default port number is 554 and it can be changed to any port No.
ranges from 1 to 65535.
HTTPS Port: The default port number is 443, and it can be changed to any port No.
that is not occupied.
Server Port: The default server port number is 8000, and it can be changed to any
port No. ranges from 2000 to 65535.
Enhanced SDK Service Port: The default server number is 8443. It refers to the
port through which the client adds the device. Certificate verification is required
to ensure the secure access.
Note:
When you use client software to visit the camera and you have changed the server
port number, you have to input the correct server port number in login interface
to access to the camera.
WebSocket Port: The default port number is 7681. It can be changed to any port
No. ranges from 1 to 65535.
WebSockets Port: The default server port number is 7682. It can be changed to
any port No. ranges from 1 to 65535.
Note:
WebSocket and WebSockets protocol are used for plug-in free live view. For
detailed information, see 7.2.11.
3. Click Save to save the settings.

7.1.5 Configure NAT (Network Address Translation) Settings

Purpose:
NAT interface allows you to configure the UPnP™ parameters.
Universal Plug and Play (UPnP™) is a networking architecture that provides
Network Camera User Manual
70