Table of Contents
Advertisement
rate (25fps/30fps), and thus the playback process is speeded up to the eye.
1. Enter the Lite Storage interface:
Configuration > Storage > Storage Management > Lite Storage
2. Check the Checkbox of Enable to enable the lite storage function.
3. Input the storage time in the text field. You can view the available space of the SD
card on the page.
4. Click Save to save the settings.
Configuring Cloud Storage
Purpose:
The captured pictures can be saved on Cloud Storage when the function is
configured.
Note: Only certain camera models support the function.
Steps:
1. Check Enable Cloud Storage.
2. Select a protocol version.
3. Input the IP address and port of the storage server.
4. Input the user name, password and confirm password for the authentication of
the storage server if you select the protocol version as Cloud1.0. Input AccessKey and
SecretKey if you select the protocol version as Cloud2.0.
5. Input picture storage pool ID on the server.
6. (Optional) You can click Test to test the cloud storage settings.
7. Click Save.
Note:
The storage server port ranges from 2000 to 65535 and the picture storage pool ID
ranges from 1 to 255.
Network Camera User Manual
146
Advertisement
Table of Contents
