Activating The Camera - HIKVISION DS-2CD2786G2-IZS User Manual

 To test the network camera, you can directly connect the network camera to the
computer with a network cable as shown in Figure 2-1.
 Refer to the Figure 2-2 to set network camera over the LAN via a switch or a router.
or
Network Camera

2.1.2 Activating the Camera

You are required to activate the camera first by setting a strong password for it before
you can use the camera.
Activation via Web Browser, Activation via SADP, and Activation via Client Software are
all supported.

Activation via Web Browser
Steps:
1. Power on the camera, and connect the camera to the network.
2. Input the IP address into the address bar of the web browser, and click Enter to
enter the activation interface.
Notes:

The default IP address of the camera is 192.168.1.64.

The computer and the camera should belong to the same subnet.
Network Camera User Manual
Connecting Directly
半球
Connecting via a Switch or a Router
or
网络交换机
12
Computer