Fire Alarm Control Panel PL-1000
3.
To define a Point, press on the icon
possible to insert up to 20 characters. Press the "enter" key to save and confirm the zone description. Press the back arrow
4.
Press on the zone number to change the Zone to which the device is linked.
This icon indicates whether the device is a Module (M) or a Sensor (S).
This icon indicates the zone to which the Sensor is linked.
42
, then press at the right side of the device number (e.g., S001) below the icon
and type the name of the device. It is
to go back to the previous screen.
M-169.1-SERIE-PL-EN / 09.2022