Breville the Tea Maker BTM800 Instruction Book page 19

Re-selecting the 'Auto Start' feature using
previous START TIME
1. Press the AUTO START button
once. The HOT WATER | C ancel and
TEA | C ancel buttons will flash.
2. Press either the HOT WATER | C ancel
or TEA | C ancel button to re-select the
desired function. The 'Auto Start' feature
has now been re-set.
NOTE
The 'Auto Start' feature can be cancelled
anytime by pressing the AUTO START button.
The LCD screen will no longer display the
AUTO START symbol and the AUTO
START button surround will cease
to illuminate.
RESETTING DEFAULT SETTINGS
Even when unplugged from the power
outlet, the Tea Maker™ will remember the
last setting used for each setting. To restore
the Tea Maker's default settings for each
function, simultaneously press and hold
AUTO START and KEEP WARM buttons
for 2 seconds.
STANDBY MODE
When the Tea Maker™ is plugged into a wall
outlet, the LCD screen will illuminate for
3 minutes before entering standby mode.
When in standby mode, the backlight of the
LCD screen will switch off and the current
time will appear on the display.
To re-activate the Tea Maker™ out of
standby mode, press any button,
except the HOT WATER | C ancel or
TEA | C ancel button on the power base.
The LCD screen will re-illuminate.
Pressing either the HOT WATER | C ancel
or TEA | C ancel button will start the
respective operation immediately.
MOVING THE TEA BASKET WHEN
NOT IN THE BREWING CYCLE
After the brewing cycle is complete, you
may wish to lower the tea basket again
for extra infusion to produce a stronger
tasting tea. To do this, press and hold the
BASKET button for 2 seconds. The button
surround will flash and the tea basket will
automatically lower to the bottom of the
glass jug.
Once the desired strength has been
reached, press and hold the BASKET button
for 2 seconds. The button surround will flash
and the tea basket will automatically rise to
the top of the glass jug.
NOTE
If the glass jug is removed from the power base
and the tea basket is in the lowered position,
it will automatically return to the top -upon
return of the glass jug to the power base.
19