Breville the Tea Maker BTM800 Instruction Book page 15

SELECTING THE 'BASKET CYCLE'
FEATURE
This feature continuously auto lifts and
lowers the basket during the tea brewing
cycle. This movement loosens the tea leaves
within the basket, allowing the heated water
to circulate freely around the tea leaves for
maximum infusion.
NOTE
The 'Basket Cycle' can significantly increase
the rate of infusion and affect the tea strength.
You may consider reducing the initial tea
strength / brew time (see page 13) when using
the 'Basket Cycle' feature.
NOTE
It is recommended that the 'Basket Cycle'
feature is used only when making between
1000mL (approx. 4 cups) to 1200mL
(approx. 5 cups).
1. To activate the 'Basket Cycle' feature,
press the BASKET button once.
The button surround will illuminate
and the LCD screen will display
BASKET CYCLE.
2. During the brewing cycle, the BASKET
button surround will flash while the
basket slowly lifts and lowers within
the heated water.
3. The 'Basket Cycle' feature can be
cancelled anytime during the tea
brewing cycle. Press the BASKET button
once. The button surround will cease
to illuminate and the LCD screen will
no longer display BASKET CYCLE.
The basket will return to the bottom
of the glass jug for the remaining
brewing time.
USE AS A VARIABLE TEMPERATURE
KETTLE
The Tea Maker™ can be used for boiling
or heating water to a customisable
temperature.
NOTE
If you have used the glass jug for making
tea we recommend thoroughly cleaning the
interior of the jug and removing the tea basket
before boiling or heating water. See Care
& Cleaning instructions on page 21.
1. Fill the glass jug with the desired
amount of water. Do not fill over
the water maximum mark
(1500ml WATER MAX).
2. a) To boil water (100°C):
Press the left
to increase the temperature to 100°C.
The 'Custom' LED will automatically
illuminate.
b) To heat water to a customised
temperature:
Press the left
to increase the temperature, or the
left ARROW DOWN button
to decrease the temperature. The
temperature can be adjusted in 5°C
increments from 50°C to a maximum
of 100°C. The 'Custom' LED will
automatically illuminate.
ARROW UP button
ARROW UP button
15