Inch Lcd Module - Sony NW-ZX300 Service Manual

2-22. 3.1inch LCD MODULE

Install the LCD FPC connector so that
it is within the alignment marks.
bottom side
adhesive sheet (multi)
LCD FPC
bottom side
front side
adhesive sheet (multi)
2 Push out the 3.1inch LCD module from
the slit in the direction of the arrow using
a flat-tipped tool, etc.
flat-tipped tool,
etc.
bottom side
3.1inch LCD module
alignment mark
alignment mark
1 Peel the LCD FPC off of
the adhesive sheet (multi).
top side
– Front view –
guide line
top side
adhesive sheet (LCD top)
adhesive sheet (LCD bottom)
3 Peel the 3.1inch LCD module off of the adhesive
sheet (LCD top) and adhesive sheet (LCD bottom).
Note: 3.1inch LCD module is affixed to the cabinet
with a strong adhesive sheets. When removing
the 3.1inch LCD module, take care so that you
do not damage it.
4 Draw the LCD FPC
out of the hole.
5 3.1inch LCD module
(See Fig. D)
adhesive portion
connector
2
1
alignment mark
NW-ZX300/ZX300A
3.1inch LCD module
slit
slit
3 Push.
33