Lithium Ion Storage Battery-2 - Sony NW-ZX300 Service Manual

2-6.

LITHIUM ION STORAGE BATTERY-2

• Continued on 2-7 (page 20).
Note 1: If the battery adhesive sheet is torn midway and
remains under the lithium ion storage battery, the
adhesive sheet cannot be peeled off exclusively.
Detouch Supporter
Check the method of obtaining this jig
to the each service headquarters.
– Bottom view –
Detouch Supporter
(side with text)
battery adhesive sheet
Note 5: As you slowly wind the battery
adhesive sheet so that it does
not tear midway, it gradually
becomes narrower.
Note 8: The removed battery adhesive sheet cannot be reused.
Make sure to replace it with a new one.
Detouch Supporter
Note 2: Check both sides (side with text)
lithium ion
storage battery
top side
front side
of the Detouch Supporter.
side with text
2 Insert the Detouch Supporter between the lithium
ion storage battery and battery adhesive sheet.
Note 3: Hold the Detouch Supporter close to
the lithium ion storage battery.
Detouch
Supporter
No gap.
1 Peel off the battery adhesive sheet
in the direction of the arrow.
Note 9: Carefully peel off so that the lithium ion
battery adhesive sheet
bottom side
3 Push down the Detouch
Supporter from the top.
Ballpoint pen, etc.
4 Wind the tip of the battery adhesive
sheet around a ballpoint pen, etc.
Note 4: Make sure to wind the battery adhesive
sheet from the bottom to top.
(The winding direction is important)
5 Use the Detouch Supporter as a support point
and take your time winding carefully.
Note 6: Take care so that the battery adhesive sheet
does not tear midway.
Note 7: In the unlikely event that the lithium ion storage battery gets
damaged such as scratches or bloating while peeling off the
battery adhesive sheet, the lithium ion storage battery cannot
be reused. Make sure to replace it with a new one.
6 Wind until the battery adhesive sheet
is completely peeled off.
NW-ZX300/ZX300A
lithium ion
storage battery
– Side view –
storage battery does not get damaged.
19