Main Board-1 - Sony NW-ZX300 Service Manual

NW-ZX300/ZX300A

2-16. MAIN BOARD-1

• Continued on 2-17 (page 29).
Insert the connector straight into the interior.
OK
Insert straight into
the interior.
connector
1 Remove the solder.
[black]
(L = 32 mm, silver dot)
2 Remove the solder.
[white]
(L = 26 mm)
top side
front side
Install the LCD FPC connector so that
it is within the alignment marks.
top side
connector
(CN6104)
28
NG
Insert only part way.
connector
3 Remove the solder.
[black]
(L = 21 mm)
4 Remove the solder.
[white]
(L = 21 mm)
5 HP BTL connector
(CN1002)
6 LCD FPC connector
(CN6104)
alignment
mark
connector
top side
– –
bottom side
Push.
LCD FPC
NG
No gap.
1 Soldering the
MAIN board
wire [white].
(L = 21 mm)
connector
wire [red]
Gap.
connector
Push.
wire [red]
2 Soldering the
MAIN board
wire [black].
(L = 21 mm)
3 Soldering the
MAIN board
wire [white].
(L = 26 mm)
4 Soldering the
MAIN board
wire [black].
(L = 32 mm,
silver dot)
NG
High position.
Push.