Panel Spacer, Rear Cover Assy; Rear Spacer (Bottom) - Sony NW-ZX300 Service Manual

NW-ZX300/ZX300A
Note: Follow the disassembly procedure in the numerical order given.
2-2.

PANEL SPACER, REAR COVER ASSY

1 Lift the rear cover block while slowly
peeling off the adhesive sheet (cover)
from the corner of the top side.
3 Peel off
the panel
spacer.
4 panel spacer
(See Fig. A)
top side
front side
2-3.

REAR SPACER (BOTTOM)

1 plastic screw
Note: When removing plastic screw,
use the T8 screwdriver for screws
with hexalobular (Torx®).
top side
front side
16
When installing the rear cover assy, align and attach in the order below.
adhesive sheet
(cover)
1 Push.
3 Push.
5 rear cover
assy
2 Peel off the rear
cover block.
bottom side
2 screw (B1.4)
(L = 4.0 mm)
3 rear spacer (bottom)
bottom side
2 Push.
4 Push.
top side
front side
7 Push.
top side
T8 screwdriver for screws with hexalobular (Torx®)
Please use to available on the market.
2.30 mm (Bolt diameter: M2.5)
adhesive sheet
(cover)
8 Push.
6 Push.
bottom side
5 Push.
panel spacer