Sponge Filter; Troubleshooting; Optional Accessories - Makita DCL284F Instruction Manual

HEPA filter
Optional accessory
NOTICE:
Do not rub or scratch the HEPA filter
with hard objects such as a brush and a paddle.
Clogged HEPA filter causes poor suction performance.
Clean out the filter from time to time.
Occasionally wash the HEPA filter in water, rinse and
dry thoroughly in the shade before use. Never wash the
filter in a washing machine.
► Fig.33

Sponge filter

When the sponge filter becomes dirty, clean it as
follows.
1.
Remove filters that cover the stay.
2.
Pull out the sponge filter from between the pillars.
3. Clean the sponge filter by tapping or washing. If
you wash it, dry it out thoroughly before use.

Troubleshooting

Before asking for repairs, check the following points.
Symptom
Weak suction power
Not working
Noise and vibration
CAUTION:
Do not attempt to repair the cleaner by yourself.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Extension wand (Straight pipe)
• Nozzle
• Nozzle for carpet
• Shelf brush
• Sash nozzle
4.
it in the original position. Make sure that each bottom
edge of the pillar holds down the sponge filter, and
there is no gap between the sponge filter and suction
opening.
► Fig.34: 1. Sponge filter 2. Bottom edge of pillar
Wall mount for cordless cleaner
Optional accessory
NOTE: The screw to mount the holder is not included.
Prepare a screw which fits with the material to screw
into.
Attach the wall mount for cordless cleaner to a hard
wooden wall, beam or column, where the wall mount
for cordless cleaner can be firmly secured. Always be
sure that the wall mount for cordless cleaner is securely
attached before hanging the cleaner.
► Fig.35: 1. Wall mount for cordless cleaner
mount violently or hang other appliances than the
cleaner.
Area to be investigated
Is the capsule full of dust?
Is the filter clogged?
Is the battery cartridge discharged?
Is the battery cartridge discharged?
Is the filter clogged?
Is the nozzle, pipe or suction inlet of the
appliance is clogged?
Is the nozzle/pipe inlet blocked?
•
•
•
•
•
•
•
•
•
•
•
•
•
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
15 ENGLISH
Insert the sponge filter between the pillars and set
CAUTION:
Do not hang the cleaner to the wall
Empty the capsule of dust.
Clean or wash the filter.
Charge the battery cartridge.
Charge the battery cartridge.
Clean or wash the filter.
Remove the clogged objects in the nozzle,
pipe or suction inlet of the appliance.
Do not block the nozzle/pipe inlet.
Round brush
Flexible hose
Filter (non-woven cloth)
Prefilter
High performance filter
HEPA filter
Seat nozzle
Crevice nozzle
Wall mount for cordless cleaner
Cyclone unit
Cyclone attachment
Tool bag
Makita genuine battery and charger
Fixing method