Manual Mode; Cycle Setting - Electrolux SkyLine ChillS 202 User Manual

1. Open the lower drawer and touch the Delayed start icon .
7 7
Fan Fan
speed speed
Delayed Delayed
start start
5:30 PM
2. Set the Delayed start on the numeric keypad and start the
cycle.
MAN UAL USER
09:30
1
Delayed start
1 2 3
4 5 6
7 7
15:59
7 8 9
:59
Fan Fan Turbo Turbo
Holding Norms
speed speed cooling cooling
09:30 AM
0
Delayed Delayed Save Save
start start program program
5:30 -10°C -20°C
3. The display shows the countdown of the remaining time to
the cycle start.
MAN UAL
05:30
09:30
Holding Turbo Turbo
Norms Guide-
cooling cooling
lines
Save Save
program program
-10°C -20°C
MAN UAL
1
Delayed start
05:30
09:30 AM
USER
Delayed start
4. If you want the appliance to perform the preparation phase
for the delayed cycle, see chapter E.12 Settings mode
(Manual ⇨ General, ⇨ ) and enable the feature "Delayed
start precooling" (
In this case the appliance asks to perform the preparation
phase (precooling/preheating) for the cycle at the set time.
USER
Touch the to execute the preparation phase or touch
to disable it.
The appliance starts the countdown. The display shows the
delay start icon, the remaining time and the set starting time.
It is still possible to skip the delay and start immediately the cycle.
In this case the appliance starts the preparation phase.
Skip Delay start
E.7

Manual mode

E.7.1

Cycle setting

1. Press the ON/OFF button to switch the appliance on.
The display illuminates and shows, by default the main
screen of the MANUAL mode.
2. Select a cycle (for example Chill cycle).
3. If the default parameters are suitable for food, touch the
button to start the cycle.
If it is necessary to stop the cycle, hold down the button
.
/ ).
MAN UAL USER
1
Delayed start
Preparation phase request
Do you want to perform the preparation
phase for this cycle?
05:30
09:30 AM
MAN UAL
1
Chill
0
°C
Soft / Hard
01:30
:00
15