Cisco Catalyst IW9167E Hardware Installation Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Wireless Access Point
  5. Catalyst IW9167E
  6. Hardware installation manual
Cisco Catalyst IW9167E Hardware Installation Manual

Cisco Catalyst IW9167E Hardware Installation Manual

Heavy duty access point
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation
Guide
First Published: 2023-02-23
Last Modified: 2023-02-23
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883

Advertisement

Table of Contents
loading

Related Manuals for Cisco Catalyst IW9167E

Summary of Contents for Cisco Catalyst IW9167E

  • Page 1 Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide First Published: 2023-02-23 Last Modified: 2023-02-23 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883...
  • Page 2 © 2023 Cisco Systems, Inc. All rights reserved.

  • Page 3: Table Of Contents

    Power Injectors Ethernet (PoE) Ports SFP Option Antennas and Radios Supported External Antennas C H A P T E R 2 Unpacking Your Access Point Package Contents Unpacking the Access Point Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 4 Connecting to SFP Port Using Cable Gland Using M12 Adapter on SFP Port C H A P T E R 4 Configuring and Deploying the Access Point Controller Discovery Process Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 5 This Device Meets FCC Guidelines for Exposure to Radio Waves This Device Meets the Industry Canada Guidelines for Exposure to Radio Waves Cet appareil est conforme aux directives internationales en matière d'exposition aux fréquences radioélectriques Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 6 Contents Additional Information on RF Exposure Declaration of Conformity Statements Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

  • Page 7: Preface

    Communications, Services, and Additional Information, on page viii About this Guide This guide provides instructions to install your Cisco Access Point and provides links to resources that can help you configure it. This guide also provides mounting instructions and troubleshooting information.

  • Page 8: Related Documentation

    Preface Related Documentation Related Documentation All user documentation for the Catalyst IW9167E Heavy Duty access point is available at the following URL: https://www.cisco.com/c/en/us/support/wireless/catalyst-iw9167-series/series.html For detailed information and guidelines about configuring and deploying your access point in a wireless network, see the following documentation: Cisco Catalyst 9800 Series Wireless Controller Software Configuration Guide, Cisco IOS XE Cupertino 17.9.x...

  • Page 9: About Cisco Catalyst Iw9167E Heavy Duty Access Point

    Antennas and Radios, on page 8 Introduction to Cisco Catalyst IW9167E Heavy Duty Access Point The Cisco Catalyst IW9167E Heavy Duty Access Point is a tri-band 802.11ax (Wi-Fi 6) AP that provides reliable wireless connectivity for mission-critical applications as organizations automate processes and operations.

  • Page 10: Connectors And Ports

    • Bluetooth Low Energy (BLE) radio enables IoT use cases such as location tracking and wayfinding • Client or AP mode – Cisco URWB, WGB, or AP • 1 x multi-Gigabit (mGig) copper Ethernet port (supporting PoE, including IEEE 802.3at/bt, Cisco UPoE, 100 Mbps/1 Gbps/2.5 Gbps/5 Gbps) •...
  • Page 11 (RJ-45) / M12 X-code auto-sensing PoE+ in A-code by using M12 adapter) (802.3at/bt), UPOE-in Note M12 X-code port by using M12-RJ45 adapter can support up to 2.5G rate. Antenna ports GNSS port Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

  • Page 12: 4-Pin Micro-Fit Connector For Dc Power

    Black ( - Negative Terminal) Pin 2 Not assigned Pin 3 White (+ Positive Terminal) Pin 4 Not assigned M12-RJ45 Adapter M12-RJ45 adapter (Cisco PID: IW-ACC-M12ETH=) can be used to support M12 X-coded connector. Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

  • Page 13: M12-Pwr Adapter

    Table 1: M12-RJ45 Pinouts RJ45 Signal M12 X-Code B1_DA+ B1_DA- B1_DB+ B1_DB- B1_DD+ B1_DD- B1_DC- B1_DC+ M12-PWR Adapter M12-PWR adapter (Cisco PID: IW-ACC-M12PWR=) can be used to support M12 A-coded DC power connector. Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

  • Page 14: Power Sources

    BLACK (22 AWG) Power Sources The Cisco Catalyst IW9167E Heavy Duty Access Point is supported on these power sources: • DC power: 24 to 48 VDC • Power over Ethernet (PoE): 802.3at (PoE+), 802.3bt (PoE++), Cisco Universal PoE (Cisco UPOE). For...

  • Page 15: Power Injectors

    About Cisco Catalyst IW9167E Heavy Duty Access Point Power Injectors Power Injectors The Cisco Catalyst IW9167E Heavy Duty Access Point supports the following power injectors: • IW-PWRINJ-60RGDMG=: Operating: -40°C to +70°C. Power derating of 60W at 70°C, and 65W at 65°C. Supports 100M/1G/2.5G/5G/10G rates.

  • Page 16: Antennas And Radios

    10km SFP-10G-T-X 30m@10Gbps CAT 6A/CAT 7 SFP-10G-T-X is not in supported in Cisco IOS XE Release 17.9.3. Note SFP modules are not hot-swappable. When you plug and unplug the SFP module, a manual reload of the AP is required. Client data is passed to the network controller through the fiber connection via a fiber-capable switch or controller.
  • Page 17 Supports 5 GHz radio in 4x4,2x2,1x1 mode. Supports 5 GHz radio in 4x4,2x2 mode. Supports SIA. Port 7 Port 8 Supports 5 GHz radio in 4x4 mode. Supports 5 GHz radio in 4x4 mode. Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 18 Omnidirectional Dipole Antenna (Gray) AIR-ANT2568VG-NS= — N male Cisco Aironet Dual-Band Omnidirectional Dipole Antenna (Gray), Self-Identifying AIR-ANT2480V-N= — — N male Cisco Aironet 2.4 GHz 8 dBi Omnidirectional Dipole Antenna Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 19 Multi-Polarized Antenna IW-ANT-PNL-59-N= — — N female 5 GHz Dual-Port Dual-Slant +/-45 (x2) Degree Polarized Directional Panel Antenna IW-ANT-SKS-514-Q= — 5 GHz Directional Shark Antenna, female (x2) Dual-Slant +/-45 Degree Polarized Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 20 The following table shows the external GNSS antennas supported by the IW9167EH access point. Table 6: Supported GNSS Antenna Frequencies Supported Connector Description ANT-GNSS-OUT-TNC= 1560 - 1608 MHz TNC male Outdoor Active GNSS Antenna with 15-ft. integrated cable Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

  • Page 21: Unpacking Your Access Point

    Return the packing material to the shipping container and save it for future use. Step 3 Verify that you have received all items ordered. If any item is missing or damaged, contact your Cisco representative or reseller for instructions. Cisco Orderable Accessories Order the following accessories separately from Cisco: •...
  • Page 22 20 ft. LMR-400-DB, N(m)-STR to N(m)-RA AIR-CAB025HZ-N= 25 ft. LMR-400-DB/FR/CMR, N(m)-STR to N(m)-RA CAB-L600-30-N-N= 30 ft. LMR-600-DB, N(m)-STR to N(m)-RA CAB-L240-10-Q-N= 10 ft. LMR-240-FR/CMR, N(m)-STR to QMA(m)-RA CAB-L240-15-Q-N= 15 ft. LMR-240-FR/CMR, N(m)-STR to QMA(m)-RA Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 23 For more information, see the power injector data sheet. AIR-PWRINJ-60RGD2= 60W outdoor rated power injector, International version with blunt-end cable. For more information, see the power injector data sheet. Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 24 Unpacking Your Access Point Cisco Orderable Accessories Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

  • Page 25: Installation Overview

    Performing a preinstallation configuration is an optional procedure. If your network controller is properly configured, you can install your AP in its final location and connect it to the network from there. The following illustration shows the preinstallation configuration setup: Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 26 • As the AP attempts to connect to the controller, the LED cycles through a green, red, and off sequence, which can take up to five minutes. If the AP remains in this mode for more than five minutes, the AP cannot find the primary Cisco Catalyst Note 9800 Series Wireless Controller.

  • Page 27: Preinstallation Checks And Installation Guidelines

    If your AP does not indicate normal operation, turn it off and repeat the preinstallation configuration. Note When you are installing a Layer 3 access point on a subnet that is different from the Cisco Catalyst 9800 Series Wireless Controller, ensure the following setup is configured: •...

  • Page 28: Mounting The Access Point

    To mount the access point using the integrated flange mounts: Step 1 Choose the access point location that can safely support the weight of the access point. Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 29 Insert a mounting screw in each of the four mounting holes and tighten. Step 6 You can use the keyholes for “hands-free” installation. Ensure that the access point is firmly secured. Note Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

  • Page 30: Using The Din Rail Mounting Bracket

    DIN rail mounting bracket clip To DIN rail mount the access point: Step 1 Assemble the access point and DIN rail mounting bracket using the M6 hardware supplied as shown in the following figure. Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 31 Ensure that the DIN rail seats into the anti-slip clips. Step 4 Pull down the retention handles until the lower lip of the DIN rail mounting bracket seats in the lower mounting bracket clip. Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

  • Page 32: Using The Pole Mounting Bracket

    Ensure that you symmetrically tighten the nuts on the U-bolts. If you over tighten one side, the U-bolt will skew. Step 3 Torque the nuts to 6 to 7 foot-pounds. Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

  • Page 33: Using The Mounting Bracket Air-Accpmk3700-2

    Assemble two strap brackets on the pole clamp bracket that are positioned for the pole diameter you are using to mount the access point. The following image illustrates the pole diameter indicators and bolt holes on the pole clamp bracket. Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 34 Position the strap brackets on the pole clamp bracket for the pole diameter you are using and secure each strap bracket with two M8 x16 bolts (with lock washers), as the following image shows. Tighten the bolts to 13 to 15 ft lbs (17.6 to 20.3 N-m). Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 35 • Banding strap tool (BAND IT) (Cisco AIR-BAND-INST-TL=) • Ground lug (provided with access point) • Crimping tool for ground lug, Panduit CT-720 with CD-720-1 die (http://onlinecatalog.panduit.com) • #6 AWG ground wire Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 36 Step 9 Tighten the metal bands using the banding strap tool (BAND IT) (Cisco AIR-BAND-INST-TL=) by following the operating instructions in the box with the tool. Ensure that the metal bands are as tight as possible.
  • Page 37 (17.6 to 20.3 N-m). Step 14 Use the included bolts, washers, and nuts to attach the access point to the mounting plate. Step 15 Torque the nuts to 6 to 7 ft-lbs. Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

  • Page 38: Attaching A Power Adapter

    Using the Mounting Bracket AIR-ACCPMK3700= , on page Step 2 Attach the power supply using 4x 6-32 screws and torque the screws to 8.3-11 in-lbs, as shown in the following figure. Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

  • Page 39: Attaching A Power Adapter Using The Mounting Bracket Air-Accpmk3700-2

    Attaching a Power Adapter Using the Mounting Bracket AIR-ACCPMK3700-2= To attach a power adapter (IW-PWRADPT-MFIT4P=) to the access point on a pole using the mounting bracket AIR-ACCPMK3700-2=, use the following procedures: Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 40 Step 2. Step 5 Attach the access point to the mounting plate as described in step 14 and step 15 of Using the Mounting Bracket AIR-ACCPMK3700-2=, on page Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

  • Page 41: Installing A Lightning Arrestor

    Installation Considerations Cisco recommends that you bulkhead mount the lightning arrestor so it can be installed as a wall-feed through on the wall of the protected space.

  • Page 42: Grounding The Access Point

    (the longer the run, the greater the loss). Cisco recommends a high-quality, low-loss cable for use with the lightning arrestor. Grounding the Access Point In all installations, after mounting the access point, you must properly ground the unit before connecting power cables.
  • Page 43 Connect the supplied ground lug to the access point ground connection point using the supplied screws. Apply supplied oxide inhibitor between the ground lug and the access point ground connection. Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

  • Page 44: Powering The Access Point

    UPOE. For more information, see Power Sources, on page Power Feature Matrix The following table provides the AP power feature matrix. Table 10: Cisco Catalyst IW9167E Heavy Duty Access Point Power Feature Matrix Power 2.4G dBm Per dBm Per 5G/6G...

  • Page 45: Connecting A Power Injector

    Connect the Ethernet cable to the AP PoE-In port. Connecting to the DC Power Port Using Cable Gland Follow these steps to connect to the DC power port using cable gland: Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 46 Insert the grommet into the ferrule, and press it into the PG13 body. Step 5 Tighten the clamp nut onto the PG13 body until the grommet compresses onto the DC cable. Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

  • Page 47: Connecting Dc Power Port Using M12 Adapter

    Ensure the O-ring is on the M12-PWR adapter. Step 2 Plug in DC connector into the chassis. Press M12-PWR adapter onto the chassis, and ensure that the wires are not pinched. Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 48 Step 3 Tighten the M12-PWR adapter captive screws into the chassis. SFP port connected using M12 adapter DC power port connected using M12 adapter RJ-45 port connected using M12 adapter Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

  • Page 49: Connecting Data Cables

    5. Tighten the clamp nut onto the PG13 body until the grommet compresses onto the RJ-45 cable. DETAILED STEPS Step 1 Disassemble PG13 cable gland and slide parts over RJ-45 cable in the order shown in the following figure: Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

  • Page 50: Connecting To The Rj-45 Port Using M12 Adapter

    2. Align the RJ-45 tab with the RJ-45 connector in the chassis, and plug the M12 adapter into thechassis. 3. Tighten the M12 adapter captive screws into the chassis. DETAILED STEPS Step 1 Ensure the O-ring is on the M12 adapter. Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 51 Align the RJ-45 tab with the RJ-45 connector in the chassis, and plug the M12 adapter into thechassis. RJ-45 tab Captive screws M12-RJ45 adapter Step 3 Tighten the M12 adapter captive screws into the chassis. Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

  • Page 52: Connecting To The Sfp Port Of The Access Point

    DETAILED STEPS Step 1 Insert the fiber SFP into the chassis. Step 2 Disassemble the fiber adapter and slide parts over fiber cable in the order shown in the following figure: Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 53 Step 6 Tighten the clamp nut onto the adapter body until the grommet compresses onto the fiber cable. SFP port connected using cable gland DC power port connected using cable gland Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

  • Page 54: Using M12 Adapter On Sfp Port

    5. Tighten the M12 adapter captive screws into the chassis (4 in the above figure). DETAILED STEPS Step 1 Insert the copper SFP in the chassis. Step 2 Ensure the O-rings are on the M12 adapter and spacer. M12 adapter O-ring Spacer O-ring Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 55 Tighten the M12 adapter captive screws into the chassis (4 in the above figure). SFP port connected using M12 adapter DC power port connected using M12 adapter RJ-45 port connected using M12 adapter Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 56 Installation Overview Using M12 Adapter on SFP Port Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

  • Page 57: Configuring And Deploying The Access Point

    Checking the Access Point LEDs, on page 50 Controller Discovery Process The Cisco AP must join a controller to function as an AP and start serving clients. Cisco uses a process called controller discovery process to join a controller. The devices use Lightweight Access Point Protocol (LWAPP) to communicate with each other.

  • Page 58: Deploying The Access Point In A Wireless Network

    When an AP receives an IP address and DNS information from a DHCP server, it contacts the DNS to resolve CISCO-CAPWAP-CONTROLLER.localdomain. When the DNS sends a list of controller IP addresses, the AP sends discovery requests to the controllers.
  • Page 59 Blinking Red This status indicates that an Ethernet link is not operational. Cycling through Red, Green, This is a general warning of insufficient inline power. and Amber Cisco URWB OS Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 60 In the state of requesting IP address from DHCP server. (Provisioning) mode: Fallback Limbo Amber This status indicates that the IP address is retrieved (Provisioning) from DHCP server. mode: DHCP Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

  • Page 61: Troubleshooting

    • The AP status LED changes to solid red, and all the files in the AP storage directory are cleared. • If you keep the Reset button pressed for more than 60 seconds, the button is assumed as being faulty and no changes are made. Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

  • Page 62: Troubleshooting The Access Point To Controller Join Process

    The following is a DHCP Option 43 configuration example on a Microsoft Windows 2003 Enterprise DHCP server for Cisco Catalyst lightweight APs. For other DHCP server implementations, consult the product Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 63 <Default router> is the IP address of the default router, such as 10.0.0.1 <DNS Server> is the IP address of the DNS server, such as 10.0.10.2 Step 3 Add the option 43 line using the following syntax: Example: Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 64 The type is f1(hex). The length is 2 * 4 = 8 = 08 (hex). The IP addresses translate to 0a7e7e02 and 0a7f7f02. Assembling the string then yields f1080a7e7e020a7f7f02. The resulting Cisco IOS command added to the DHCP scope is option 43 hex f1080a7e7e020a7f7f02.

  • Page 65: Safety Guidelines And Warnings

    • Performing Site Surveys, on page 60 Safety Instructions The translated warnings are available in the Translated Safety Warnings for Cisco Catalyst Access Points, which is available on Cisco.com. Warning IMPORTANT SAFETY INSTRUCTIONSThis warning symbol means danger. You are in a situation that could cause bodily injury.

  • Page 66: Fcc Safety Compliance Statement

    The FCC, with its action in ET Docket 96-8, has adopted a safety standard for human exposure to RF electromagnetic energy emitted by FCC-certified equipment. When used with approved Cisco antennas, Cisco Catalyst products meet the uncontrolled environmental limits found in OET-65 and ANSI C95.1, 1991. Proper operation of this radio device according to the instructions in this publication results in user exposure substantially below the FCC recommended limits.

  • Page 67: Safety Precautions When Installing Antennas

    Code, Article 810, Canada: Canadian Electrical Code, Section 54). Statement 280 • Before you install an antenna, contact your Cisco account representative to explain which mounting method to use for the size and type of antenna that you are about to install •...

  • Page 68: Performing Site Surveys

    • Data rates: Sensitivity and range are inversely proportional to data bit rates. The maximum radio range is achieved at the lowest workable data rate. A decrease in receiver sensitivity occurs as the radio data increases. Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 69 • Have you configured the APs before you go onsite? It is always easier to resolve configurations or device problems first. • Do you have the proper tools and equipment to complete your survey? Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...
  • Page 70 Safety Guidelines and Warnings Performing Site Surveys Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

  • Page 71: Declarations Of Conformity And Regulatory Information

    Information • Manufacturers Federal Communication Commission Declaration of Conformity Statement, on page 63 • Operation of Cisco Catalyst Access Points in México, on page 64 • VCCI Statement for Japan, on page 64 • Compliance Statement for Canada, on page 66 •...

  • Page 72: Operation Of Cisco Catalyst Access Points In México

    This is a Class A product based on the standard of the VCCI Council. If this equipment is used in a domestic environment, radio interference may occur, in which case, you may be required to take corrective actions. Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

  • Page 73: ステートメント 191-日本向け Vcci クラス A に関する警告

    あります。この場合には使用者が適切な対策を講ずるよう要求される ことがあります。 VCCI-A Guidelines for Operating Cisco Catalyst Access Points in Japan This section provides guidelines for avoiding interference when operating Cisco Catalyst access points in Japan. These guidelines are provided in both Japanese and English. English Translation This equipment operates in the same frequency bandwidth as industrial, scientific, and medical devices such as microwave ovens and mobile object identification (RF-ID) systems (licensed premises radio stations and unlicensed specified low-power radio stations) used in factory production lines.

  • Page 74: Compliance Statement For Canada

    (c.-à-d., qu'ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Industry Canada Access Point Models Certification Number IW9167EH-A IC:2461A-IW9167EH Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

  • Page 75: European Community, Switzerland, Norway, Iceland, And Liechtenstein

    This section contains information on compliance with guidelines related to RF exposure. Generic Discussion on RF Exposure The Cisco products are designed to comply with the following national and international standards on Human Exposure to Radio Frequencies: • US 47 Code of Federal Regulations Part 2 Subpart J •...

  • Page 76: This Device Meets International Guidelines For Exposure To Radio Waves

    The IW9167EH device includes a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) as referenced in Health Canada Safety Code Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

  • Page 77: Cet Appareil Est Conforme Aux Directives Internationales En Matière D'exposition Aux Fréquences Radioélectriques

    Additional Information on RF Exposure You can find additional information on the subject at the following links: • Cisco Systems Spread Spectrum Radios and RF Safety white paper at this URL: http://www.cisco.com/warp/public/cc/pd/witc/ao340ap/prodlit/rfhr_wi.htm • FCC Bulletin 56: Questions and Answers about Biological Effects and Potential Hazards of Radio Frequency Electromagnetic Fields •...

  • Page 78: Declaration Of Conformity Statements

    • The Mobile Manufacturers Forum at this URL: www.mmfai.org Declaration of Conformity Statements All the Declaration of Conformity statements related to this product can be found at the following location: https://pas.cisco.com/pdtcnc/#/ Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide...

Table of Contents