Cisco Catalyst IW9167E Hardware Installation Manual page 18

Supported External Antennas
Note Do not connect omnidirectional antennas directly to both ports 1 - 4 and ports 5 - 8. To avoid interference
between the 5 GHz radios, use coaxial cables and mount one set of antennas at least 3 ft. (1 m) vertically away
from the antennas attached directly to the chassis. Omnidirectional antennas may be connected to either ports
1 - 4 or 5 - 8, but not to any combination of both 5 GHz radios' antenna ports simultaneously.
If you connect directional antennas to both 5 GHz radios, space them at least 10 ft. (3 m) apart vertically, or
at least 5 ft. (1.5 m) apart horizontally with their main beams aimed at least 90 degrees apart.
Supported Wi-Fi Antennas
The following table shows the external Wi-Fi antennas supported by the IW9167EH access point.
Table 4: Supported Wi-Fi Antennas
PID
IW-ANT-OMV-2567-N=
IW-ANT-OMH-2567-N=
AIR-ANT2547V-N=
AIR-ANT2547VG-N=
AIR-ANT2547VG-NS=
AIR-ANT2568VG-N=
AIR-ANT2568VG-NS=
AIR-ANT2480V-N=
Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide
10
Antenna Gain (dBi)
2.4 4.9 5 GHz
GHz GHz
4 7 7
4 7 7
4 — 7
4 — 7
4 — 7
6 — 8
6 — 8
8 — —
About Cisco Catalyst IW9167E Heavy Duty Access Point
Connector Antenna Name
N male 2.4/5 GHz Tri-Band Omnidirectional
Dipole Antenna, Vertically Polarized,
Self-Identifying
N male 2.4/5 GHz Tri-Band Omnidirectional
Dipole Antenna, Horizontally
Polarized, Self-Identifying
N male Cisco Aironet Dual-Band
Omnidirectional Dipole Antenna
(White)
N male Cisco Aironet Dual-Band
Omnidirectional Dipole Antenna
(Gray)
N male Cisco Aironet Dual-Band
Omnidirectional Dipole Antenna
(Gray), Self-Identifying
N male Cisco Aironet Dual-Band
Omnidirectional Dipole Antenna
(Gray)
N male Cisco Aironet Dual-Band
Omnidirectional Dipole Antenna
(Gray), Self-Identifying
N male Cisco Aironet 2.4 GHz 8 dBi
Omnidirectional Dipole Antenna